Hitachi P50T501 Flat Panel Television User Manual


 
25
How to Use the Remote to Control Your TV
IMAGE INPUT
IMAGE INPUT
IMAGE INPUT
IMAGE INPUT
1
2
16:9 STANDARD 2
Use this aspect mode to display 16:9 sources like
HDTV and DVD’s preserving the original 16:9
aspect ratio showing 100% of the size.
ASPECT button
Press this button to quickly change the picture format ASPECT ratio. Depending on the input signal format
received, the picture format ratio allows you to adjust the images through the following options.
Antenna-Analog Channel
S-Video/Video Input
(Auto Aspect: Off)
HDMI-480i/480p Input
(Auto Aspect: Off)
Component-480i/480p
Input (Auto Aspect: Off)
Note: Please see Appendix A
on page 153-154.
Antenna-Digital Channel (4:3)
S-Video/Video 4:3/Letter
Input (Auto Aspect: On)
HDMI-480i/480p 4:3/
Letter Input (Auto Aspect: On)
Component-480i/480p 4:3/
Letter Input
(Auto Aspect: On)
Note: Please see Appendix A
on page 153-154.
S-Video/Video 16:9 Input
(Auto Aspect: On)
HDMI-480i/480p 16:9 Input
(Auto Aspect: On)
Component-480i/480p
16:9 Input
(Auto Aspect: On)
Note: Please see Appendix A
on page 153-154.
Antenna-Digital Channel (16:9)
HDMI-720p/1080i/1080p Input
Component-720p/1080i
Input
Note: Please see Appendix A
on page 153-154.
NOTE: 1. The Aspect Style in all video inputs have independent Aspect Style setting.
2. Vertical position adjustments are directly available when you choose 4:3 EXPANDED/ZOOM1/ZOOM2 or
16:9 ZOOM aspect style (see also page 43).
4:3 STANDARD
Use this aspect mode to display conventional (4:3)
images. Side panels (gray areas) are placed to the
left and right of the image to preserve the original
aspect ratio of the source. Note: Use this mode for
only 15% of your total viewing time to prevent
uneven aging of the phosphors. Phosphors in the
lighted area of the picture will age more rapidly
than the gray areas.
4:3 EXPANDED
Use this aspect mode to display conventional (4:3)
sources by linearly increasing image expansion
from the center towards the edges of the display
area in order to fill it.
4:3 ZOOM1/ZOOM2
Use these aspect modes to zoom in on conventional
(4:3) sources.
16:9 STANDARD 1
Use this aspect mode to display 16:9 sources like
HDTV and DVD’s preserving the original 16:9
aspect ratio showing 95% of the size.
16:9 ZOOM
Use this aspect to Zoom-in once while in 16:9 aspect.
3. When displaying 16:9 STANDARD 2 it may appear lines at the edge of the picture this is normal operation
of the TV.
1
1
²
The Remote Control