Filter
Top Products
Getting Started
12
Look at the back of your TV for a connector that looks like one of
these, and follow the corresponding hookup option. If you have any sort of cable
box, see the hookup options in Advanced Operations (page 46).
Simple Antenna/Cable 75 Ohm Hookup
This is an easy hookup that you can use if your cable or antenna has a 75 ohm
round wire connector. You will need the 75 ohm cable supplied with your VCR.
It looks like this:
If you have been watching the TV in your home before getting the VCR, you will
already have a round wire attached to your TV. Otherwise, look for a cable
connection coming in through the wall from outside. (If you find this connection,
remember to call your local cable company to start the service.)
1. If still hooked up to your TV, unscrew the round wire from the 75 ohm
connector on your television. Otherwise, take the wire that comes in from the
wall.
2. Screw this round wire into the IN FROM ANT jack on the back of your VCR.
3. Using the 75 ohm cable supplied with your VCR, slide on either end to the
OUT TO TV jack on the back of the VCR.
4. Connect the other end of the same cable onto the 75 ohm antenna input on
your TV (where you first disconnected the TV in step 1.)