Filter
Top Products
Basic Operations (Recording)
36
You set up the delayed recording using the on-screen Easy Guide System.
Press the PROGRAM button, then press number buttons 1, 2 or 3 for ONE
TIME, DAILY, or WEEKLY RECORDING. Follow the white dashes "--" on screen
to complete the programming.
Remember to press 0 before single-digit channel numbers, times, and dates - for
example, 0 and 6 for channel 6.
After you enter the channel and time, the VCR automatically shows the current
date or the next date, whichever is most logical. Leave the date as it comes up,
or enter new digits for the month and day.
If you make a mistake when entering digits, press CLEAR repeatedly to return
the white dash "--" to the digit to be corrected. Then, punch in the correct
number. Illogical times and dates won't be accepted.
If you want to record from external equipment, press AVX button to select
LINE1 or LINE2 instead of the channel number.
When everything is set as you want (even though white dashes "--" may still
appear on some items), press PROGRAM to program your settings into memory.
To preset additional recordings, repeat these steps.
Don't forget to load a videocassette to record on.
Your delayed recording settings take effect when you turn off the power on the
VCR.
When the power is off, the delayed recording indicator will display on the VCR.
This tells you that the VCR will automatically record at the times and dates you
have programmed.
To Stop a Delayed Recording in Progress
Press POWER and then immediately - within 10 seconds - press the STOP
button (use buttons on the remote or VCR as you wish).
An Example
Let's say you were interviewed today by a local TV reporter. You're eager to see
yourself on the evening news tonight. The news comes on channel 8 at 6 0'clock-
-but you've got a meeting scheduled during that time. Luckily you just purchased
this Hitachi VCR.
Press the PROGRAM button, then press 1 to bring up the screen for One Time
recording:
Now fill in the blanks:
Select channel 8 by pressing 0 and 8 on the remote control.
Enter the start time by pressing 0, 6, 0, and 0 for 6 o'clock. Then press 2 for
PM