Filter
Top Products
No picture during
playback.
-rv cannot be operated
by the VCR's remote.
Mechanical sounds
during the STOP mode.
Is -rv correctly tuned?
"Noisy" picture despite all
previous adjustments,
even when playing
different cassettes?
-rv set to the correct
video viewing channel?
Is VCR remote control
programmed for your
TV?
Is remote control set to
control the -rv?
Has a loaded cassette
been stopped more than
5 minutes?
hookup.
Fine tune the -rv. Press
the CHANNEL up or
down button to adjust
tracking.
Have video heads
cleaned by a qualified
service technician.
Set -rv to channel 3 or 4.
Follow instructions in
Advanced Operations to
program the remote to
send signals that your -rv
can recognize.
Press the -rv device
button, then press the
button corresponding to
the -rv function you want.
Nothing is wrong, the
tape protection
mechanism is
working. Eject the
cassette when you are
done viewing.
55