Filter
Top Products
19
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
* PURCHASED SEPARATELY
AUTO INSTALL
Setting the channel automatically
1 Switch on at the mains supply socket after completely connecting all leads. Please refer to page 10 to
16 on "HOOKUP" sections.
The VCR will be in the standby mode at this stage.
2 Press the POWER button on the VCR to start the auto install.
This screen appears to show that the channel is being set. The "
" will flash in the VCR's display.
• The VCR will automatically store
channels received in your area.
• It takes about 2 - 3 minutes.