Filter
Top Products
Remote Software
______________________________________________________________________________________________
76
Setup Overview
Setup Screen Overview
This is an expandable list with multiple levels. Click the + box next to HRDP
Performance Series Setup to expand the menu tree and access the Camera,
Record, Sensor Setup and System Setup details. Many of the setup options are
the same in the remote software and in the DVR system. Click Apply after
changing any settings.
Camera Setup
Camera Setup
The Camera Setup display allows the user to define camera names, power on
and off cameras and define specific cameras as hidden.
Title - Enter camera name - up to seven characters.
Enable - ON / OFF [Enable individual cameras.]
Hidden –ON / OFF - On will hide the camera from logged out users.
PanTilt Setup
The PanTilt (PTZ) Setup display allows the user to define the appropriate
protocol for connected cameras with PTZ capabilities. Since setup varies
between different PTZ cameras, refer to the instructions supplied by the
camera’s manufacturer to complete setup.
ID – 1 ~ 255 [Set the PTZ ID]
PROTOCOL –Select a PTZ protocol
Sequence Setup
The Sequence Setup display allows the user to set the parameters for:
Page Dwell Time - 1 ~ 100 seconds [Set the sequence interval time for full
screen on Main Display]
Camera Dwell Time - 1 ~ 100 seconds [Set the sequence interval time for
individual cameras on Main Display]
Channel - 1 ~ 16 / All [Select cameras to display in Main Display]