![](http://pdfasset.owneriq.net/1/76/1767de0d-8d71-4750-bf9b-c426f38f0459/1767de0d-8d71-4750-bf9b-c426f38f0459-bg56.png)
Appendix B
Connector Pin Outs
The has a 50-pin connector used for alarm input and output,
RS-232 network connections, VCR trigger pulse, and updating the
multiplexer’s firmware. A sub-board is supplied to simplify connections.
See the illustration below for connection details.
multiplexer
< Figure 61 > Connector Sub-Board
72