Filter
Top Products
UHF Tuning
How to set the UHF-modulator if your receiver is connected to the TV with
a TV cord.
Channel
Select a proper output channel that will not be interfered by other
TV-transmissions or other surrounding equipment that make use
of a UHF-modulator (VCR, DVD, TV-game etc.)
The range of channels and frequency value are different for each
PAL Standard.
PAL-standard
Select transmission (modulation) standard for the UHF-modulator.
Standard for the Nordic countries is PAL G.
Others, se picture.
Offset
Adjust the fine tuning value. The Offset ranges from -4 to +4 and
each Offset represents 1MHz.
Other Setting
Select the OSD Transparency, Information Box Display Time etc.
OSD Transparency
Select the OSD Transparent type. It affects Information box,
Soundtrack, Subtitle, Service list, Time and Quick mode of TV
Guide. Use the
buttons to toggle transparent, opaque, 20%,
40%, 60% and 80%.
Info.Box Display Time
Set the display duration of Information box displayed on the screen
after changing services. The time ranges from 0 to 20 seconds.
Menu Background
Set the type of background for the menu to be displayed on.
Changing to Reserved Service
Select Auto Mode if the receiver should automatically change
channel when a reserved event starts. Select Manual Mode if you
want to receive a message on the screen saying that the reserved
event has started, and then yourself chose to change channel.
?
UHF Tuning
Channel 43
PAL Standard PAL-G
Offset 0
PAL I or G for Europe : CH 21 - 69
PAL B for Europe/Australia : CH 28 - 69
PAL D for China : CH 13 - 62
PAL K for Russia : CH 21 - 69
EN24
Settings & Functions
?
Other Setting
OSD Transparency 60%
Info Box Display Time 5
Menu Background Bild 1
Changing to Reserved Service
Auto