Filter
Top Products
English
EN7
General
Picture and sound
Digital TV is a transmission technology that replaces the traditional analogue technique.
This means that several TV channels, radio channels and other digital services can be
transmitted on the same space as just one channel took up before. As a consumer you
get access to many more channels and services than before at the same time as they are
received with perfect picture and audio quality
The digital-TV-receiver (Set-Top-Box) converts the digital signal into a format that is suitable
for your TV and sound system.
Connecting your Set-Top-Box is just as simple as connecting for example a video recorder.
You get the best picture quality by using a SCART-cable for connection to your TV-set. The
best audio experience is obtained by connecting an optical cable to your sound system.
Scrambled transmissions
The content or some parts of the content transmitted in the terrestrial network may be
scrambled. For this your Set-Top-Box is equipped with two slots for the possibility to connect
two separate de-scrambling modules (Conditional Access Modules). Module, smart-card
and subscription may be obtained from your local dealer or directly from the service
provider.
Coverage
Before buying this product it is anticipated that you have made sure that there are digital
transmissions covering your region.
Antenna / Signal source
Depending on the reception your Set-Top-Box may be connected to a simple indoor antenna
or to an existing outdoor antenna system. If you live in a flat you should make sure that
the digital terrestrial signals are distributed to your wall antenna outlet. If you have your own
antenna system you must make sure that it is equipped with antennas, filter and/or amplifier
that can handle those frequencies that the digital channels are transmitted on.
Cable-TV
Please observe that this Set-Top-Box is not designed for the reception of regular digital
cable-TV signals (QAM-signal). Despite this, operators of smaller cable networks may have
chosen to distribute the digital terrestrial signals (COFDM-signal) in the network. In this case
this Set-Top-Box may well be used.
Check with your landlord if you are insecure about what type of TV-signal that is provided
in the wall antenna outlet
Connecting more receivers to the same antenna
If you have another analogue or digital STB and you wish to use the same RF Signal. In this
case you can connect it via the loop through. Connect one end of a RF cable to the TV/VCR
on the STB and connect the other end to the RF (ANT) on your second STB.
Connect