Filter
Top Products
**
**
1. If new software is found when powering on
1. A message will be displayed to notify that new software is
found.
2. Select Yes and press the OK
button to update the
software.
3. Starts downloading new software. Please wait until the
updated is completed.
4. When completing the software update, the equipment is
automatically powered off and on again.
2. If updating software from Menu
1. Press the MENU button.
2. Select Installation using the
button, and press the
OK
or button.
3. Enter Password using the NUMERICAL (0-9) buttons.
4. Select Software Update using the
button, and press
the OK
or button.
3. Automatic Update
You can set the product to find HUMAX software update site and update software automatically.
1. Select Automatic Update using the
button, and
press the OK
or button. Automatically search for new
software.
2. When detecting update software, the following result is
displayed. If new software is not found by Automatic, use
Manual Update.
3. Select Yes and press the OK button to start updating.
Select No and press the OK
button to return to the previous menu without updating.
Select Later and press the OK
button to update later. That means the update menu
display as soon as you turn on the receiver next time.
4. When completing the software update, the product is automatically powered off and on again.
**
9. Software Update
GB 58
**
**
**
**
**
**
**
**
**
**
**
**
**
**