Filter
Top Products
4-3. Service Searching
A service is transmitted in a transport stream. To watch the service,
all services in the transport stream should be searched and stored in
this menu. The proper information to search the stream is
provided by the network operator. Please contact your installer
or the network operator.
** The default PIN code is .
The services can be searched with minimal information in this menu,
“Easy Search”. But it takes more time, if the parameters are set as
“Auto”. To search the services quickly, please give proper information
for each items.
Select the number of VHF/UHF channel, in which the transport
stream is transmitted by using the buttons or the
NUMERIC buttons(0~9). If the number is not correct, STB will fail
to search any service.
Select the proper item within “2K FFT”, “8K FFT” and “Auto” by using
the buttons. If the information is not known, then “Auto” can be
selected. But this takes slightly longer time if “Auto” is selected.
Select the proper item within “1/4”, “1/8”, “1/16”, “1/32” and “Auto”
by using the buttons. If the information is not known, then
“Auto” can be selected. But this takes slightly longer time.
Select the proper item within “None”, “alpha=1”, “alpha=2”, “alpha=4”
and “Auto” by using the buttons. If the information is not know,
then “Auto” can be selected. But this takes longer time.
Select the option “YES” to search all services in the network.
Then, after STB succeeds to lock to the signal, STB will get proper
information on the services in the other channels and stores the
information automatically. If the network operator does not
transmit proper information in the default channel, STB can not
search all services. It is required to search for all channels manually.
Easy Search
Channel
Mode
Guard Interval
Hierarchy
Network Search
0000
Guide of Main Menu
GB29