Filter
Top Products
GB9
TV with VCR and Motorised System (DiSEqC 1.2)
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB
and the other end to a SCART socket on your TV.
2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB
and the other end to a SCART socket on your VCR.
3. Connect the coaxial cable from the REC of your motorised system(DiSEqC 1.2 Motor)
to the LNB IN socket on the STB.
4. Connect the coaxial cable from the LNB to the LNB connector in the DiSEqC 1.2 motor.