Filter
Top Products
GB35
1. Move the Category cursor to Wakeup Service No., and then
move to the Item window using the OK or buttons.
2. Select the desired service using the buttons and press
the OK button.
Use the TV/RADIO( ) button on the remote control unit to
toggle TV/Radio service.
Depending on Time Setting, select the time when STB is turned off.
1. Move the Category cursor to Sleep Time, and then move to the
Item window using the OK or buttons.
2. Select Enabled using the OK button. The Time Input window
will appear.
3. Enter the time in the order of hour and minute using the
NUMERIC buttons.
4. Press the OK button to complete Sleep Time setting.
Sleep Time
Wakeup Service No.
Set the video mode for the TV SCART output.
Set the audio mode which is output from the TV RCA/Cinch Jack.
(Stereo/Mono).
1. Move the Category cursor to Audio Output, and then
move to the Item window using the OK or buttons.
2. Select STEREO or MONO using the buttons and
press the OK button.
Audio Output
Video Output(CVBS/S-Video/RGB)
A/V Output Setting