Filter
Top Products
GB44
User’s Manual
9. Setup
In this chapter you can congure the installation setting and perform channel search. Menus such as
freesat tune, software update and factory reset is included in this section.
Note:
Press the EXIT button to save the changes and return to the previous menu. Press the MENU
button to exit the menu screen.
9.1 Freesat Tune
1. Press the MENU button.
2. Select
Setup using the
/ button and press the
OK button.
3. Select
Freesat Tune using the
/ button and
press the OK button.
4. Enter your region code.
5. Please note that once you perform
Freesat Tune,
all freesat channels will be deleted. Select Ye s and
press the OK button to delete all freesat channels.
6. Select
Search and press the OK button to search
channels.
7. The channel search will start.
8. To stop the search, press the
OK button during
channel search.
9. The results will appear. Select
Save and press the OK button.
Note: If there are no channels available, a message indicating the result will pop up.
9.2 Manual Tune
1. Press the MENU button.
2. Select
Setup using the
/ button and press the
OK button.
3. Select
Manual Tune using the
/ button and
press the OK button.
4. Select
Search and press the OK button. The
channel search will start.
5. To stop the search, press the
OK button during
channel search.
6. The results will appear. Select
Save and press the
OK button.
Transponder Select All or the value in the transponder list and press the OK button. If the
required value is not available, select User Dene and enter the transponder
value directly.