Filter
Top Products
10.3 SMATV Search
SMATV Search allows you to perform channel search regardless of the setting value in antenna setting.
1. Press the MENU button.
2. Select Installation using the
button and press the OK
button.
3. Select SMATV Search using the button, and press the OK
button.
4. Select Search Type using the
button.
5. Select one option from Auto and Manual using the OK
or
button.
1. SMATV Automatic Search
Start/End Frequency
1. Select Start/End Frequency using the
button.
2. Enter the frequency using the NUMERIC(0-9) buttons.
Note: Enter the frequency from 950 to 2150 MHz.
**
Symbol Rate
1. Select Symbol Rate using the
button.
2. Select one option among 27500, 26000 and 22000 using the OK
or button. If the required value does not exist, select
User Define and enter the symbol rate directly.
**
Note: You can enter up to four symbol rates.
**
Select Search and press the OK button.
GB 69