Filter
Top Products
Setting the Analogue Channels
19. Setting the Analogue Channels
Setting the Analogue Channels Manually
The Manual Programme allows you to manually tune and arrange the channels in the
order you desire. You can also assign a channel name with characters to each channel
number. It's only for analogue TV mode.
1. Press the MENU button.
2. Select Channel using the ̵/̷ button, and press the OK or ൘ button.
3. Select Manual Programme using the ̵/̷ button, and press the
OK or ൘ button.
4. Select System using the ̵/̷ button, and press the ൖGor ൘ button to select
a particular system.
BG:I:DK
5. Select Band using the ̵/̷ button, and press the ൖGor ൘ button to select
a particular system.
V/UHF : Cable
6. If you know the channel number to be stored, select Channel using the ̵/̷
button, and press the ൖ, ൘ or NUMERICAL (0~9) button to select number.
If you do not know the channel number, select Search using the ̵/̷Gbutton,
and press the ൖGor ൘ button to start search.
7. Select Programme No. using the ̵/̷Gbutton, and press the ൖ, ൘ or
NUMERICAL (0~9) button to assign a programme number into the
channel.
8. Select Name
using the ̵/̷Gbutton, and press the OK or ൘Gbutton
to change a name.
To select a letter (A~Z, 0~9, +, -), press the ̵/̷Gbutton.
To move on the previous or next letter, press the ൖGor ൘ button.
To store the changing name, press the OK button.
9. Select Fine Tune using the ̵/̷Gbutton, and press the ൖGor ൘ button to
fine-tune the channel manually. If the signal is weak or distorted, you may
have to fine-tune the channel manually.
10. When you are satisfied with your choice, press the BACK button to
store the current setting values.