Filter
Top Products
41536-01 1/25/2002 5
programming your device code
1. Manually turn on your device.
2. On your Hunter Universal Video & Fan Remote,
press and hold the device button for 3 seconds.
The red indicator light comes on and goes off.
3. Release the device button. The red indicator light
comes on as you release the device button.
4. Press the 4 digit code listed for your device brand
on pages 7-13. The red indicator light should go
off when pressing a button and come on when
the button is released.
5. The red indicator light should flash 3 times to
indicate that the code was successfully entered.
The remote then exits to the normal operating
mode.
testing your device code
1. Press and release the device button.
2. Press and release the POWER button.
3. If your device does not turn off, start over with
programming your device code and try the next
code listed for your device brand. If you are still
unable to find a code, try searching for your
device code. If you are unable to program your
device, feel free to contact Hunter Customer
Service for assistance at 1-888-830-1326.
4. Once you have found the code that works for your
device, write the code in the space provided.
0
9
8
7
654
312
POWER
TV
VCR
DVD
CBL/SAT
TV
VCR
DVD
CBL/SAT
setting up your remote control
CBL/SAT
DVD
VCR
TV