Filter
Top Products
10
Before you request repair service
The following occurrences do not indicatethat the television is faulty. Before you
request repair, follow the listed methods to checkthe device.
Occurrences Possible reasons
No picture andsound Battery pack isexhausted or notmaking
contact, AC adapter orautomobile
adapter is not properly connected.
Uncertified poweris being used.
Power switch is off. Is it properly to
choose TV/AV?
No picture Check to see if the channelsselected
correctly. Readjust automatic
channeltuning. Channels should be
resetin a new region.
No sound Check to see if the audiovolume is off or
audio system is improperly set and
theearphone is inserted. Poor signal or
the sound elimination function is on. Is it
properlyto choose audio system{S.SYS)?
Poor reception Check if theaudio system is correct?
Antenna is correctly adjusted and thatthe
channel is tuned correctly.
Dark picture Check that thebrightness and contrast are
set correctly. Also that the environmental
is too low
Vaguepicture or unstable picture Check that theantenna is correctly
adjusted. Possibly the groundingsignal is
tooweak. Snowflake interference
ispossibly affected electric wave
interference from vehicle motors, trains,
high-voltage powerwired or neon lights.
No color Check that thecolor and the color system
are adjusted correctly. If you are
receiving abad signal. check to see the
color elimination function is on.
Remote control doesn'twork Check to seethat whether batteries are
exhausted and strong sunshineis on the
receiver.