IBM DM-10 DVR User Manual


 
29
2
If recorded audio is difficult to understand because of noise, adjust the Noise Cancel setting
level. Noise will be reduced in the file when its played back for better sound quality.
Noise Cancel Function
1
Press and hold the MENU button
for 1 second or longer while the file
is playing.
Displays currently set Noise Cancel level.
2
Press the MENU button again to
choose a noise cancel level.
The levels switch in the following rotation,
OFF LOW HIGH.
If the display is already set to Noise Cancel,
start from step 2.
Change the Noise Cancel level within 8
seconds, otherwise the level is set at the
displayed level and the display returns to its
original view.
.......................................................................................................
Notes
If you set it to LOW or HIGH, the display flashes the Noise Cancel
level for about 2 seconds when a file is played back.
If you set Noise Cancel to LOW or HIGH, the setting remains
valid until it's set to OFF.
If you set Noise Cancel to LOW or HIGH, you cannot use the
Fast Playback and Slow Playback functions.
If Noise Cancel is used for files recorder in SHQ, the files will be
played in monaural mode.
1,2
Noise Cancel Function