Filter
Top Products
9
Insignia NS-15CLTV 15" Combo DVD/LCD TV
www.insignia-products.com
Connecting to a computer
To connect a computer video source to the
VGA jacks:
1 Remove the port cover on the back of the
TV (4).
2 Connect a VGA cable (2) from the
computer (1) to the VGA INPUT port on
the TV.
3 Connect a male-to-male audio cable (3) from
the computer (1) to the AUDIO VGA INPUT
port on the TV.
4 Press the INPUT button and the
buttons to set the TV’s signal input to PC.
Using your TV
Turning the power on and off
To turn the power on and off:
1 Press the POWER button on the top of the
TV or on the remote control. The POWER
indicator turns green.
2 To turn off the TV, press the POWER button
again. The screen image disappears and the
STANDBY indicator turns red.
Changing the volume
You can change the volume using the TV’s top
panel or the remote control.
To change the volume:
1 Press VOL+ or VOL- .
2 Press MUTE to mute the sound, and press it
again to restore sound.
Changing the video source
Your TV supports multiple video sources.
To select the video source:
• Press the INPUT button to select from the
following signal modes, then press ENTER to
confirm the selection:
•TV
•AV
•S-Video
•DVD
•PC
Changing channels
To change channels:
• Press CH+/- or CH / .
To enter a channel number directly:
• Press the number buttons on the remote
control.
To switch between two channels:
1 Press RECALL to change from the currently
tuned channel to the previous channel.
2 Press RECALL again to change back to the
originally tuned channel.
Programming channels into memory
To automatically program channels into
memory:
1 Press TV MENU on the remote control, then
press to highlight the INSTALL icon.
The INSTALL menu opens.
Note
The best resolution for displaying computer video
on this TV is 1024 × 768.
Note
A small amount of electric power is consumed
even when the power is turned off.
NS-15CLTV - combined.fm Page 9 Wednesday, July 26, 2006 1:01 PM