Insignia NS-22E730A12 CRT Television User Manual


 
59
Insignia 15"/19"/22"/24" LED-LCD TV
www.insigniaproducts.com
Maintaining
Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
Storage temperatures are 32° to 122°F (0° to 50°C).
Working temperatures are 41° to 104°F
(5° to 40°C).
Do not place your TV in direct sunlight or near a
heat source.
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
screen or cabinet with the cloth. Use a clean cloth to
dry the screen or cabinet.
Cleaning the TV screen
Clean the screen with a soft, lint-free cloth.
Troubleshooting
Video and audio
Warning
Do not try to repair your TV yourself. Contact
authorized service personnel.
Problem Solution
Picture does not fill the
screen. There are black bars
around the picture.
Change the aspect ratio. An increasing amount
of digital TV and movies are presented in wide
screen (16:9). See “Adjusting the TV picture” on
page 32.
No picture (screen is not lit)
and no sound.
Press on the TV or the remote control.
Make sure that the Audio Only option is set to
Off. See “Playing TV audio only” on page34.
Make sure that the video cables are connected
securely to your TV.
Adjust the contrast and brightness. See
“Adjusting the TV picture” on page 32.
Make sure that the power cord is plugged in.
Make sure that the correct video input source is
selected. See “Selecting the video input source”
on page 29.
Try another channel. The station may be
experiencing problems.
Make sure that the incoming signal is
compatible.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 13
or “Connecting an antenna or cable TV (no box)”
on page 17.
Check the closed caption settings. Some TEXT
modes can block the screen.
Dark, poor, or no picture
(screen is lit), but sound is
good.
Try another channel. The station may be
experiencing problems.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 13
or “Connecting an antenna or cable TV (no box)”
on page 17.
Adjust the brightness. See “Adjusting the TV
picture” on page 32.
Make sure that the correct picture mode is
selected. See “Adjusting the TV picture” on
page 32.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 38.
If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
Make sure that the video cables are connected
securely to your TV.
The video cable(s) you are using may be bad. Try
a new set.
Try another channel. The station may be
experiencing problems.
No color, dark picture, or
color is not correct.
Try another channel. The station may be
experiencing problems.
Adjust the color settings. See “Adjusting the TV
picture” on page 32.
Make sure that the video cables are connected
correctly and securely to your TV.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 13
or “Connecting an antenna or cable TV (no box)”
on page 17.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 38.
If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
Only snow (noise) appears
on the screen.
Try another channel. The station may be
experiencing problems.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 13
or “Connecting an antenna or cable TV (no box)”
on page 17.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 38.
If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
Problem Solution