Filter
Top Products
19
32"/37"/42" LCD, 120 Hz 1080p
www.insigniaproducts.com
Turni ng on your T V fo r the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, time mode, picture mode, and TV signal
source.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See
page 9 for details).
• Connected an antenna, cable TV, or satellite
TV. (See page 14 for details.)
• Connected the power cord. (See page 14 for
details.)
2 Press (power) to turn on your TV. The Choose
your menu language screen opens.
3 Press or to highlight English, Francais, or
Español, then press OK/ENTER. The Time screen
opens.
4 Press or to select Auto or Manual, then
press OK/ENTER.
5 Press or to highlight Time Zone, then press
or to select your time zone. You can select
Eastern, Central, Mountain, Pacific, Alaska,
Hawaii, Atlantic, or Newfoundland.
6 Press or to highlight Daylight Savings,
then press or to select On (if your viewing
area observes Daylight Savings Time) or Off (if
your viewing area does not observe Daylight
Savings Time).
7 If you selected Manual for Mode, set the date
by pressing or to highlight Year, Month, or
Day, then press or to adjust the setting.
8 If you selected Manual for Mode, set the time
by pressing or to highlight Time, then
pressing or to select the hour, minute, or
AM/PM field. Press or to adjust the setting.
9 Press OK/ENTER. The Choose your Picture Mode
screen opens.
10 Press or to highlight Home Mode (default)
or Retail Mode, then press OK/ENTER.
If you selected Retail Mode, a message appears
“Are you sure you want Retail mode? Since in
this mode Energy saving is not realized.” Select
Ye s to continue, or select No to change your
selection.
The Choose your TV source screen opens.
11 Press or to highlight Antenna, Cable, or
Cable/Satellite Box (if your cable TV uses a box,
select Cable/Satellite Box), then press
OK/ENTER. If you chose Antenna or Cable, your
TV automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
Notes
• If you set the time mode to Auto, the date and
time are set based on a time signal received
from a DTV channel, and the only options you
can adjust are Time Zone and Daylight Savings.
• You can change the menu language or scan for
channels at a later date. For more information,
see “Selecting the menu language and
transparency” on page 13 or “Automatically
scanning for channels” on page 13.
MENU
EXIT
OK
ENTER
Choose your menu Language
English
Français
Español
MOVE SELECT PREVIOUS EXIT
Set menu language to English, Français, or Español
MENU
EXIT
OK
ENTER
If Automatic, options are automatically set by TV source
Time
otuAedoM
Newfoundland
On
2010
Jan
1
12 : 01 AM
Time Zone
Daylight Savings
Year
Month
Day
Time
MOVE SELECT PREVIOUS EXIT
MENU
EXIT
OK
ENTER
Choose your Picture Mode
Home Mode
Retail Mode
MOVE SELECT PREVIOUS EXIT
Reduces total power consumption
MENU
EXIT
OK
ENTER
Channel scan may take 20+ minutes
Choose your TV source
Antenna
Digital Channels
Analog Channels
0
0
Cable
Cable/Satellite box
MOVE SELECT PREVIOUS EXIT
Scanning for digital channels
NS-32L_37L_42L550A11_09-1120_MAN_V2_English.book Page 19 Thursday, January 21, 2010 10:20 AM