Filter
Top Products
6
NS-37L760A12
www.insigniaproducts.com
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Maintaining
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F
(5° to 40°C).
• Do not place your TV in direct sunlight or near a
heat source.
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
screen or cabinet with the cloth. Use a clean cloth to
dry the screen or cabinet.
Cleaning the TV screen
Clean the screen with a soft, lint-free cloth.
Specifications
Specifications are subject to change without notice.
Warranty
Dimensions and weight
Screen
Display resolutions/VGA scan rates
Tuner
After Auto Channel
Search, there are no
channels
• Reception can vary by channel depending on the
broadcast power level of a given station. Contact
your cable or satellite TV provider.
• Make sure the antenna or cable/satellite TV is
connected securely to your TV.
• Try replacing the cable between the
antenna/cable or cable/satellite box and your
TV.
One or more channels
do not display.
• Make sure that the channels are not blocked. See
“Setting parental control levels.”
• Make sure that the channels are not hidden. The
channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add the
channel back to the channel list. See “Hiding
channels” in the online User Guide.
• If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
• Make sure you have the correct input selected to
view channels from the cable or satellite box.
• If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” in the online User Guide.
Password is lost.
•Enter 9999 to access parental controls, then set
a new password. See “Setting or changing the
password” in the online User Guide.
Some settings cannot be
accessed.
• If a setting is grayed, the setting is not available
in the current video input mode.
TV cabinet creaks.
• When the TV is in use, the temperature rises
naturally and may cause the cabinet to expand
or contract which can cause a creaking noise.
This is not a malfunction.
Control buttons do not
work
• Make sure that the Button Lock option is set to
Off. See “Locking control buttons” in the online
User Guide.
• Unplug the power cord, wait a few seconds, then
plug the cord back in and turn on your TV.
TV keeps turning off
• Make sure that the sleep timer is not turned on.
See “Setting the sleep timer” in the online User
Guide.
Problem Solution
Parts: 2 years Labor: 2 years
Without stand
35.5 × 22.85 × 3.5 in. (90.11
× 57.93 × 8.95 cm)
25.02 lbs. (11.35 kg)
With stand
35.5 × 24.5 × 9.5 in. (90.11 ×
62.35 × 24.14 cm)
30.03 lbs. (13.62 kg)
Screen size measured
diagonally
37"
Display type LCD
Panel 60 Hz vs.120 Hz 60Hz
Display resolution 1080p
Panel resolution 1920 (H) × 1080(V)
Aspect ratio 16:9
Contrast ratio (typical)–panel 1500:1
Dynamic contrast ratio
(typical) – list value
6000:1
Brightness (center typical)
cd/m2-panel
400
Comb filter 3d y/c digital
Response time 8ms
Horizontal viewing angle
(typical)
178
Vertical viewing angle
(typical)
178
HDMI
Suggested resolutions
1080p, 1080i, 720p, 480p, 480i
Component video
Suggested resolutions
1080i, 720p, 480p, 480i
PC/VGA
Suggested scan rates:
720 × 400/70Hz,
640 × 480/60Hz,
640 × 480/72Hz,
640 × 480/75Hz,
800 × 600/56Hz,
800 × 600/60Hz,
800 × 600/75Hz,
1024 × 768/60Hz,
1024 × 768/70Hz,
1024 × 768/75Hz,
1280 × 768/60Hz,
1280 × 1024/60Hz,
1280 × 1024/75Hz,
1920 × 1080/60Hz
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM