Filter
Top Products
9
Insignia NS-37LCD 37” LCD TV
www.insignia-products.com
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
watch scrambled channels using the
converter/descrambler controls.
Connecting a sound system
To connect to a sound system:
1 Plug the S/PDIF optical cable into the S/PDIF
jack on the back of your TV.
2 Plug the other end of the S/PDIF cable into
the S/PDIF in jack on the sound system.
Connecting a VCR
You can connect a VCR with a standard
audio/video cable or with a S-Video cable. The
S-Video cable does not carry sound. If you use
an S-Video cable, you need to use audio cables
to connect the audio output.
To connect a VCR and play a videotape:
1 Plug the audio/video cable into the AUDIO L,
AUDIO R, and VIDEO in jacks on the back of
your TV.
2 Plug the other end of the audio/video cable
into the audio and video out jacks on the
VCR.
- OR -
Plug in the audio cables as described above,
then plug one end of an S-Video cable into
the S-Video jack on the back of your TV and
the other end into the S-Video jack on the
VCR.
3 Turn on your TV.
4 Press the INPUT button repeatedly to select
Composite1 (or S-Video if you connected
the VCR to the S-Video jack).
5 Turn on your VCR.
6 Insert a videotape, then press the PLAY
button.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
For home theater systems, use an S/PDIF
(optical) cable to achieve full sound capabilities.
RF switch
Cable converter/descrambler box
Two-set signal splitter
Out
In
A
B
TV
S/PDIF (optical)
cable
S/PDIF IN jack
Audio processor
Stereo system
OR
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
For better video, use the S-Video jack if your VCR
has an S-Video connection.
OR
S-Video cable
Audio cable
Video cable
Y=yellow (video)
W=white (audio left)
R=red (audio right)
TV
VCR