4
www.insigniaproducts.com
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-42P650A11 or
NS-50P650A11 represents the state of the art in
plasma TV design and is designed for reliable and
trouble-free performance.
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 (NS-50P650A11 only) Connect the guide stand
into the stand, then secure the guide stand to
the base with the six included M4 × L12 screws.
2 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches, then slide the
stand into the TV.
3 Secure the TV to the stand with the four
included M4 × L12 screws (50-inch model) or
M4 × L16 screws (42-inch model).
Securing your TV to a wall or cabinet
You can secure your TV to a wall or cabinet with an
anti-fall device (sold separately). To purchase an
anti-fall device in the U.S., call 1-877-467-4289.
Warnings
• Your TV screen is heavy. You should use two
people to lift the screen and hold it in place.
• Make sure that you install the base securely
before moving it. The stand could fall and cause
serious injury.
•Always store your TV upright.
Warnings
• Pushing, pulling, or climbing on your TV can
cause it to fall resulting in serious injury or
damage to your TV.
• For added stability, secure your TV to the wall
with an anti-fall device.
• If you do not think you can install an anti-fall
device, contact a professional installer.