Filter
Top Products
23
Insignia 55" LED-LCD HDTV, 120 HZ 1080p
www.insigniaproducts.com
6 Press S or T to highlight Daylight Savings,
then press
W or X to select On (if your viewing
area observes Daylight Savings Time) or Off (if
your viewing area does not observe Daylight
Savings Time).
7 If you selected Manual for Mode, set the date
by pressing
S or T to highlight Year, Month, or
Day, then press
W or X to adjust the setting.
8 If you selected Manual for Mode, set the time
by pressing
S or T to highlight Time, then
pressing W or X to select the hour, minute, or
AM/PM field. Press S or T to adjust the setting.
9 Press ENTER. The Choose Your Picture Mode
screen opens.
10 Press
S or T to highlight Home Mode or Retail
Mode, then press ENTER.
If you selected Retail Mode, a message appears
“Are you sure you want retail mode? In this
mode ENERGY STAR savings are not realized.”
Select Ye s to continue, or select No to change
your selection.
The Choose Your TV Source screen opens.
11 Press
S or T to highlight Antenna, Cable, or
Cable/Satellite Box (if your cable TV uses a box,
select Cable/Satellite Box), then press ENTER.
If you chose Antenna or Cable, your TV
automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
During auto channel search, your TV searches
for digital channels first. When the digital
channel search is complete, a message appears
asking if you want to search for analog channels.
Select Ye s to continue searching for analog
channels, or select No to stop searching for
channels.
12 To watch TV, press INPUT, press
S or T to
highlight the video input source for your TV in
the Input Source list, then press ENTER.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI 1, HDMI2, or
HDMI3.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component.
• If your TV is connected to a cable or satellite
box using a composite video cable, select AV.
Understanding the basics
Turning your TV on or off
To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV. The power
indicator LED turns blue.
3 Press (power) again to turn off your TV. Your
TV enters Standby mode and the power
indicator LED turns red.
OK
ENTER
MENU
EXIT
Reduces total power consumption
Home Mode
Retail Mode
MOVE
EXIT
PREVIOUS
SELECT
Choose Your Picture Mode
EXIT
Digital Channels
Analog Channels
Scannning for digital channels
Choose Your TV Source
Antenna
Cable
Cable/Satellite Box
0
EXIT
Channel scan may take 20+ minutes
0
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.