Filter
Top Products
21
Insignia 42"/46"/55" LCD HDTV, 1080p
www.insigniaproducts.com
Turning on your T V for the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, time setting, picture mode, TV signal
source, and the channel list.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See
page 20 for details).
• Connected an antenna, cable TV, or satellite
TV. (See page 11 or 14 for details.)
• Connected the power cord. (See page 11 for
details.)
2 Press (power) to turn on your TV. The Choose
Your Menu Language screen opens.
3 Press
S or T to highlight the language you
want, then press ENTER. The Choose Your Time
Setting screen opens.
4 Press
S or T to highlight Mode, then press
W or X to select Manual (to set the date and
time manually) or Auto (to set the date and time
automatically from a TV signal source based on
the time zone you select).
5 Press
S or T to highlight Time Zone, then press
W or X to select your time zone. You can select
Newfoundland, Atlantic, Eastern, Central,
Mountain, Pacific, Alaska, or Hawaii.
6 Press
S or T to highlight Daylight Savings,
then press
W or X to select On (if your viewing
area observes Daylight Savings Time) or Off (if
your viewing area does not observe Daylight
Savings Time).
7 If you selected Manual for Mode, set the date
by pressing
S or T to highlight Year, Month, or
Day, then press
W or X to adjust the setting.
8 If you selected Manual for Mode, set the time
by pressing
S or T to highlight Time, then
pressing W or X to select the hour, minute, or
AM/PM field. Press S or T to adjust the setting.
9 Press ENTER. The Choose Your Picture Mode
screen opens.
10 Press
S or T to highlight Home Mode or Retail
Mode, then press ENTER.
If you selected Retail Mode, a message appears
“Are you sure you want retail mode?” Select Ye s
to continue, or select No to change your
selection.
The Choose Your TV Source screen opens.
11 Press
S or T to highlight Antenna, Cable, or
Cable/Satellite Box (if your cable TV uses a box,
select Cable/Satellite Box), then press ENTER.
If you chose Antenna or Cable, your TV
automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
Note
If you select Auto, the displayed time will be
incorrect until your TV gets the correct time from a
TV signal source.
OK
ENTER
MENU
EXIT
English
Français
Español
Choose Your Menu Language
MOVE
EXIT
PREVIOUS
SELECT
Set menu language to English, Français, or Español
OK
ENTER
MENU
EXIT
Mode
Time Zone
Daylight Savings
Year
Month
Day
Time
If Automatic, options are automatically set by TV source
MOVE
EXIT
PREVIOUS
SELECT
Choose Your Time Setting
Auto
Pacific
On
2011
Jan
1
12:25 AM
OK
ENTER
MENU
EXIT
Reduces total power consumption
Home Mode
Retail Mode
MOVE
EXIT
PREVIOUS
SELECT
Choose Your Picture Mode
OK
ENTER
MENU
EXIT
Digital Channels
Analog Channels
Scanning for digital channels
Choose Your TV Source
Antenna
Cable
Cable/Satellite Box
0
MOVE
EXIT
PREVIOUS
SELECT
Channel scan may take 20+ minutes
0