Insignia NS-F20TV CRT Television User Manual


 
12
Insignia NS-F20TV Television
www.insignia-products.com
Information about USA channel numbering
The ATSC PSIP channel uses a two part
channel number which includes:
a major channel number
a minor channel number
In the US, in most locations the major
channel number is the same for both analog
and digital channels (It is equal to the NTSC
channel number for existing broadcasters.)
In the US, a minor channel number of zero is
used for a broadcaster's analog channel.
Channel Numbering Example
Original NTSC channels for Des Moines, IA:
5, 8, 11, 13, and 17.
Possible NTSC + ATSC channels for Des
Moines, IA: 5-0, 8-0, 11-0, 13-0, and 17-0
(channel numbers for existing analog
channels) and 5-1, 5-2, 8-1, 8-2, 8-3, 8-4,
and 13-1 (channel numbers for digital
channels).
Controlling the sound
Using the VOL+ and VOL- buttons
Press:
VOL+ to increase the volume.
VOL- to decrease the volume.
Using the MUTE button
To mute the sound:
Press MUTE on the remote.
To resume the sound:
Press MUTE on the remote.
-OR-
Press VOL+.
Adjusting the picture
To adjust the picture:
1 With the television turned on, press MENU to
display the main menu.
2 Press or to select PICTURE.
3 Press or to enter the Picture menu.
4 Press or to select a setting to adjust.
5 Press or to adjust the setting.
Selecting a picture mode
There are three preset picture modes (Standard,
Dynamic, and Soft) and one user-set picture
mode (Personal).
To select a picture mode:
1 Press PICTURE on the remote control.
2 Select from one of the following:
STANDARD—Select for a normal picture.
DYNAMIC—Select for a bright and
dynamic picture.
SOFT—Select for a finely detailed picture.
PERSONAL—Select to create your own
picture mode.
Changing picture size
You can change the picture size (aspect ratio)
according to your video signal type or personal
preference. This can only be done in DTV mode
when the video signal type is in 16:9 format.
To change the picture size:
Press ZOOM to select the desired picture size
(aspect ratio). You can select between NORMAL
and ZOOM.
Using the clock
To enter the clock menu:
1 With the television turned on, press MENU to
display the main menu.
2 Press or to select CLOCK.
Note
Example: Channel 5-1. The “5” is the major
channel number and the “1” is the minor channel
number.
Note
If you mute the sound, the color of VOLUME
displayed on the screen turns red. After resuming
the sound, the color of VOLUME displayed on the
screen turns green.
Setting Press Press
Contrast weaker stronger
Brightness darker lighter
Color paler deeper
Tint purplish greenish
Sharpness softer sharper