Filter
Top Products
10
Insignia NS-F20TV Television
www.insignia-products.com
To use the menu:
1 With the television turned on, press MENU to
display the main menu.
2 Press or button to select a menu.
3 Press or button to enter the menu.
4 Within the menu, press or to select an
item and press or to adjust its value or
enter a sub-menu.
5 Press MENU to return to the previous menu.
-OR-
Press EXIT to exit the main menu and return
to your program.
Watching AV programs
This television provides two groups of AV input
terminals and one group of component input
terminals to connect to a VCR, DVD, game
console, or other video equipment.
To watch a video program using the AV
inputs:
• Press INPUT repeatedly until you see the
appropriate input indicator on the screen.
The order of the inputs are as follows:
• AV1—Rear AV jacks plus S-video
• AV2—Side AV jacks
• COMPONENT—Component jacks
• TV—Antenna jack
Switching from AV to TV
To switch from AV to TV:
• Press INPUT repeatedly until the television
program appears on the screen.
Displaying the information banner
The information banner displays status
information such as the channel number and the
signal source. Depending on the mode, different
information is displayed. In DTV mode, more
information (such as channel number and
channel name, and signal resolution) can be
displayed.
To display the information banner:
• Press the DISPLAY button and the
information banner appears.
Using the program guide
You can obtain program broadcasting time and
program name from the program guide.
To display the program guide:
1 Press GUIDE on the remote control to
display guide information.
2 Press or to scroll the page if there are
two or more pages.
Setting up your television stations
When you turn on the television for the first time,
you should perform an auto program to set up
the stations on your television.
To set up your television stations:
1 With the television turned on, press MENU to
display the main menu.
2 Press or to select PRESET.
3 Press or to enter the Preset menu.
4 Press or to select AUTO PROGRAM.
Note
To more clearly introduce the menu operations,
this manual provides a description based on
navigating the menus with the remote control.
The illustrations and on-screen displays in this
manual are for explanation purposes (some are
enlarged, others cropped) and may vary slightly
from the actual ones.
Note
For better quality video, use the S-Video terminal if
your source supports it.
S-video input uses the same circuit as AV1. The
S-VIDEO terminal overrides the AV1 terminal.
When using both the S-video and AV1 inputs, the
S-video signal is automatically selected and the
message on your screen displays SVIDEO. To
view a AV1 signal, disconnect the S-video
connection.
Note
The channel labels are automatically assigned
and cannot be changed by users.
Note
The guide only works with digital channels.