Filter
Top Products
10
CD Boombox with FM Radio
www.insigniaproducts.com
To use presets:
1 Press (power) to turn on your boombox.
2 Press SOURCE repeatedly to select FM radio mode.
3 Press
or to tune the radio up or down and select the station
you want.
4 To save the station as a preset, press and hold MEMORY. "P01" blinks
on the display.
5 Press PRESET repeatedly to select the preset number (P01-P10) you
want.
6 Press MEMORY to store the preset.
7 Repeat Steps 3 to 6 to store as many as ten FM presets.
8 To select a preset station, briefly press PRESET repeatedly until you
reach the station you want.
Using the CD player
You can play audio CDs, CD-Rs, and CD-RWs.
To use the CD player:
1 Press (power) to turn on your boombox.
2 Press SOURCE repeatedly to select CD mode.
3 Press the OPEN area on the CD door to open the lid.
4 Insert a CD, label side up.
5 Press the OPEN area on the CD door to close it. The total number of
tracks appears on the display.
6 Press
(play/pause) to begin playback. The current track appears on
the display. The CD stops when finished.
7 Control CD playback as follows:
• Press (play/pause) to pause playback. Press again to resume
playback.
• Press
(stop) to stop playback.
• Press once to skip to the next track.
Caution
Do not attempt to play DVDs, VCDs, or data CDs in your boombox.
You may damage your unit.
Note
If the door is opened during playback, playback stops
immediately and any repeat mode setting is reset.
NS-BIPCD03_14-0997_MAN_V4_ENG.fm Page 10 Thursday, September 4, 2014 7:27 AM