Filter
Top Products
5
Insignia NS-LCD15F 15” LCD TV
www.insignia-products.com
To connect cable TV without a
converter/descrambler box:
1 Connect one end of a 75 ohm cable to the
coaxial jack on the back of your TV.
2 Connect the other end of the cable to the
cable TV wall outlet.
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
watch scrambled channels using the
converter/descrambler controls.
Connecting to an external signal source
You can connect a DVD, VCD, or VCR using a
variety of methods, including composite cables,
component cables, or an S-Video cable. The
S-Video cable does not carry sound. If you use
an S-Video cable, you need to use audio cables
to connect the audio output.
To connect an external signal source:
1 Make one of the following connections:
• For composite video—Plug the
audio/video cable into the AUDIO L,
AUDIO R, and VIDEO in jacks on the
back of your TV.
• For S-Video—Plug in the audio cables as
described above, then plug one end of an
S-Video cable into the S-VIDEO jack on
the back of your TV and the other end into
the S-Video jack on the external signal
source.
• For component video—Plug the Y, Pb,
and Pr video cables and the Audio L and
Audio R cables into the component input
jacks.
2 Turn on your TV.
3 Press the INPUT button repeatedly to select
the external signal source you want to watch.
4 Turn on external signal source.
5 Insert a disc or videotape into the external
signal source, then press the PLAY button.
Connecting a computer
To connect a computer:
1 Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
2 Plug an audio cable from your computer’s
audio out jack into the PC IN AUDIO jack on
the back of your TV.
3 Plug in and turn on your TV.
4 Press the INPUT button repeatedly, or press
the PC key on the remote control, to select
the PC source.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1 Make sure that the AC power adapter cord is
connected to your TV and to a power outlet.
2 Press the POWER button to turn on your TV.
The power indicator LED turns green.
3 Press the POWER button again to return
your TV to standby. The power indicator LED
turns orange.
Warning
Make sure that you turn off and unplug your TV
before connecting devices.
Note
For better video, use the S-Video jack if your VCR
has an S-Video connection.
RF switch
Cable converter/descrambler box
Two-set signal splitter
Out
In
A
B
TV
Warning
Make sure that you turn off and unplug your TV
before installing devices.
RW
R
Y
AV IN COMPONENT IN
VGA
AUDIO
R
L
PC IN
DC IN
Video Component
input
Video Composite
input rear
TV
VGA
input
VGA Audio
input