Insignia NS-LCD15F Flat Panel Television User Manual


 
4
Insignia NS-LCD15F 15” LCD TV
www.insignia-products.com
Using the remote control
To use the remote control:
Point the remote control towards the remote
sensor on the front of your TV.
Setting up your TV
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
3 Replace the cover.
Universal remote control programming
This TV is compatible with several popular
universal remote controls.
Connecting your TV to a power outlet
To connect your TV to a power outlet:
Plug the power cord into a power outlet.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and
300 ohm.
If your antenna cable has a 75 ohm
connector, connect the cable to the coaxial
jack on the back of your TV.
If your antenna cable has a 300 ohm
connector, connect the cable to a
300-75 ohm adapter (not included), connect
the adapter to a 75 ohm cable, then connect
the other end of the 75 ohm connector to the
coaxial jack on the back of your TV.
Connecting cable TV
Your TV has a 75 ohm jack for connecting cable
TV.
Some cable TV providers scramble the signals
for “premium” (pay) channels. To view these
channels, you need a converter/descrambler
box.
If you do not have a converter/descrambler box,
you can connect your cable TV directly to your
TV. If you have a converter/descrambler box, you
can connect your cable TV using an RF switch
(not supplied). For more information about
connecting a converter/descramble box, contact
your cable TV provider.
15 DISPLAY Press to display status information.
16 TV Press to select TV mode.
17 PC Press to select PC mode.
18
RECALL
Press to watch the previous channel.
19
CH
Press to change TV channels up.
20 AUDIO Press to select the sound mode.
21
CH
Press to change TV channels down.
22 EXIT Press to close the on-screen menu.
23 PICTURE Press to change to Video Page.
24 SLEEP Press to set the sleep timer. For more
information, see “Setting the sleep
timer” on page 6.
Notes
Do not expose the remote control to shock or
liquids.
Do not use the remote control in an area with
high humidity.
Do not place the remote control in direct
sunlight.
Do not place objects, such as furniture,
between the remote control and the remote
sensor.
The remote control may not work if direct
sunlight or bright light shines on the remote
sensor. Either move your TV or change the
angle at which you use the remote control.
# Button Description
Notes
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is depleted.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Brand Program code
Philips 115
RCA 135
Notes
Make sure that you use the correct type of
power. See the label on your TV.
If you do not intend to use your TV for an
extended period of time, unplug the power cord
from the power outlet.
75 ohm cable
300 ohm cable