Insignia NS-PDP50HD-09 Flat Panel Television User Manual


 
25
Insignia NS-PDP50HD-09 50" PDP TV
www.insignia-products.com
Audio Language (DTV only)—Cycles
through the available audio languages.
Choices include English, Spanish, and
French.
Audio Out—This option can be set only
when the Speaker option is set to OFF.
Options are:
Variable–The audio output from your
external audio system can be
controlled by the TV’s remote control.
Fixed–The audio output from your
external audio system can be
controlled by the external audio
system’s remote control.
4 Press or to change the setting of the
selected option.
5 Press EXIT to close the menus and return to
normal viewing.
Changing TV settings
To change the TV settings:
1 Press MENU. The initial menu opens.
2 Press or to select the TV icon. The
TV
menu
opens.
3 Press or to select the option you want
to change or the sub-menu you want to open.
Options include:
Channel Scan—Press ENTER to
automatically scan for receivable
channels and create a channel list.
Tuner Mode—Toggles between the
available tuner modes. Choices are AIR
and Cable.
Channel Skip—Press ENTER to open
the
Channel Skip
sub-menu. When the
sub-menu opens, press to select the
channels you want, then press ENTER to
hide (with a check mark in the box), or
show (without a check mark) the channel.
Repeat as necessary.
Favorite List—Press ENTER to open the
Favorite List
sub-menu. When the
sub-menu opens, press to select the
channels you want on your favorite list,
then press ENTER to show (with a check
mark in the box), or hide (without a check
mark) the channel. Repeat as necessary.
4 Press or to change the setting of the
selected option.
5 Press EXIT to close the menus and return to
normal viewing.
Maintaining your TV
Careful and regular cleaning can extend the
amount of time you can enjoy your new TV.
Cleaning the screen
Wet a soft cloth in a mixture of luke warm water
and a little fabric softener or dishwasher
detergent. Wring the cloth until it’s almost dry,
and then use it to wipe the screen.
Make sure the excess water is off the screen,
and then let it air dry before you turn on your TV.
Cleaning the cabinet
Wipe the front panel and other exterior surfaces
of your TV with a soft, dry, lint-free cloth. Never
use a solvent or alcohol to clean your TV. Do not
spray insecticide near your TV. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
Troubleshooting
Operation
Video problems
Picture Mode User
Brightness 54
Contrast 50
Saturation 54
Hue 0
Sharpness 5
Color Temperature
Noise Reduction Medium
Video
Enter Select
Exit
Caution
Make sure that you turn the power off and unplug
the power cord before you begin any cleaning.
Problem Solution
Remote control
does not work
Remove obstacles between the remote
control and the player.
Point the remote control at your TV’s IR
sensor. Install fresh batteries.
Power turns off
suddenly
Make sure that the sleep timer is not set.
Check the power control settings.
Problem Solution
No picture or
sound
Check all cable connections.
Make sure that your TV is turned on.
Try another channel. It may be a
broadcast problem.
Check your antenna connection,
location, or direction.
Make sure that the power connection is
okay. Check the wall power outlet.
Picture appears
slowly when your
TV is turned on
It is normal for the image to be muted
during the startup process. If the picture
does not appear after five minutes, call
your Insignia service center.
Picture is
satisfactory, but
no sound
Check the volume level and mute setting.