Filter
Top Products
11
Insignia NS-SKPDVD Portable DVD Player
www.insignia-products.com
3 Plug the other end of the optional RCA cable into the A/V jacks on
the TV or monitor. The white connector goes into the left audio
jack. The red connector goes into the right audio jack. The yellow
connector goes into the video jack.
Using your player
To play a disc:
1 Make sure that your player is connected to power or that the
battery is charged.
2 Slide the OFF/ON switch on the front side of your player to the ON
position.
3 Slide the OPEN switch on the front of your player. The disc tray
opens.
4 Place a disc, label side up, in the disc tray, then press down on the
area marked CLOSE to close the tray. The disc starts playing
automatically.
5 If necessary, rotate the VOLUME control to adjust the volume.
6 To stop playback, press .
Controlling DVD or audio CD playback
To control disc playback:
• Press once to stop playback. Your player remembers where
you stopped. If you press , your player starts playing at the
point where you stopped.
• Press twice to stop playback. If you press , your player
starts playing at the beginning of the disc.
• Press to pause playback. Press this button again to resume
playback.
• Press to fast-forward on the disc. Each time you press this
button, the fast-forward speed changes from 2 to 4 to 8 to 16 to
32 times the normal speed.
• Press to fast-reverse on the disc. Each time you press this
button, the fast-reverse speed changes from 2 to 4 to 8 to 16 to
32 times the normal speed.
• Press to go to the next title, chapter, or track.
• Press to go to the previous title, chapter, or track.
Note
Your player and most DVDs have region codes that help
control illegal distribution of DVDs. The region code for your
player is 1. You can only play DVDs with a region code of 1.
The region code for a DVD is printed on the DVD or the DVD
packaging.