Filter
Top Products
Insignia NS-DXA2 Digital to Analog Converter Box
7
www.insigniaproducts.com
Connecting with an RF (coaxial) cable (good)
The resolution of the video signal output is 480i for both RF and AV connections, but AV gives better sound and signal
quality.
To connect your converter box with RF (coaxial) cable:
1 Connect your existing antenna cable to the RF IN jack on the converter box. You may need to remove the antenna cable
from the back of your TV and connect it to the converter box.
2 Connect a coaxial cable (included) to the RF OUT jack on the back of your converter box, then connect the other end of
the cable to the ANTENNA IN jack on the back of the TV. For best performance with this connection, change the Audio
Output option to Mono from Stereo (refer to your TV’s user guide).
3 Plug the AC adapter into a power outlet or surge protector, then plug the end of the cable into the DC IN jack on the
converter box.
4 Turn on your TV and converter box.
5 Tune the TV to channel 3 and follow the Easy Install wizard on the screen when you turn it on for the first time.
If channel 3 is used as a broadcast station in your area, you need to switch the converter box's RF Output to channel 4
after the Easy Install wizard is finished. To change the RF Output, press MENU on the remote control, select AV Settings
> RFM. Press
S T to switch between RF CH-3 and RF CH-4.
Using the analog pass-through
If you live in an area where some TV stations (such as low-power stations, translator stations, Class A stations, etc.) are still
broadcasting analog signals, your TV can receive these signals by using the analog pass-through feature of your converter
box.
To use the analog pass-through:
1 Use the included RF cable to connect the Converter Box to your TV following the instructions above.
2 Press the PASS-THROUGH button on the remote control to activate the analog pass-through function.
3 Change the channels on your TV set using the TV's remote control to tune to the desired analog channel.
Note
Analog pass-through will not work if you
connect the converter box using the optional
AV cable. However, you can connect both cable
types at the same time.
TV
Antenna
Coaxial cable
(included)
AC
adapter
NS-DXA2_13-0501_V1_ENG.fm Page 7 Monday, July 29, 2013 8:06 AM