Filter
Top Products
Insignia NS-DXA2 Digital to Analog Converter Box
23
www.insigniaproducts.com
Specifications
Design and specifications are subject to change without prior notice.
Not all channels are
available after performing
an Auto Scan.
• Adjust your antenna and scan for available channels. Press MENU, then select General
Settings, then Channel Scan.
How do I find out what
digital TV reception I get in
my area?
• To determine which antenna you need for your area, visit www.antennaweb.org. Type in your
address and zip code to find an antenna that will continue giving you free local broadcast
programming.
No Closed Caption
displayed.
• Make sure that the channel you are watching carries closed caption information.
• Press the CC button on the remote control to check for closed caption data output.
Cannot use the converter
box along with my cable
box.
• The converter box works only with over-the-air broadcast television signals, not cable or any
satellite service.
I forgot my four digit
parental control PIN.
• Press Menu > Settings > System Reset to reset the code to 1234. Note that this will restore all
settings back to their original factory settings and a new Channel Scan must be done.
RF Input
Demodulation 8VSB
Frequency Range 54 - 860 MHz
Connector Type F-Type x 1
RF Output
Signal Type NTSC
Connector Type F-Type x 1
Video Output
Signal Type NTSC
Impedance 75 Ohms
Output Level 1Vp-p
Connector RCA x 1
Audio Output
Output Left and Right channel
Impedance 600 Ohms (min.)
Output Level 2Vrms±10%@0dBFS
Connector RCA x 2
Front Panel IR Receiver
3 Key Function Control
Status LED (power and standby)
Remote Control 27 keys
Power Consumption (Product)
Operation 120VAC, 60Hz, 8W (max.)
Standby <0.8W
AC Adapter Specification
Input 100~240VAC, 50~60Hz
Output 5VDC/2.0A/10W
Dimension (W x D x H) 6.9 x 5.3 x 1.3 in. (175 x 135 x 33 mm)
Weight 8.8 oz. (250 g)
Problem Solution
NS-DXA2_13-0501_V1_ENG.fm Page 23 Monday, July 29, 2013 8:06 AM