Filter
Top Products
Insignia NS-DXA2 Digital to Analog Converter Box
22
www.insigniaproducts.com
2 Press S or T to select General Settings, then press OK. The Settings menu opens.
3 Press
S or T to select the setting you want to change, then press OK to go to that menu. You can select:
• Channel Scan—To scan for available channels.
• Language—To choose the on-screen menu language.
• Power Saver—To set the sleep timer to turn off your TV after a specified period of time. The options are 4hr, 8hr, or
Program (to turn off your TV when the current program is done), or Off. If no remote control button is press during the
specified time period, you TV will turn off automatically. To cancel the sleep timer, select Off.
• Antenna—To open the signal meter to help adjust your antenna.
• Time Zone—To set your time zone and time.
• System Reset—To reset the converter box to factory default settings. Enter your password or the default password
“1234.”
4 Press
S or T to select the setting you want, then press OK.
5 Press MENU to exit the on-screen menu.
Troubleshooting
Insignia has detailed information about troubleshooting problems on its Web site at:
www.insignia-products.com/t-frequently_asked_questions.aspx
Problem Solution
The receiver power
indicator (red LED) doesn't
light up, and no message
is displayed.
• Make sure that the AC adapter is correctly inserted into a functioning power outlet and that the
AC adapter cord is plugged into the back of the DTV converter box DC IN jack.
• Press the (power) button on the front panel to see if the red light (power indicator) is on.
Poor picture quality.
• Make sure that the antenna is pointing in the correct direction. Scan for available channels after
moving the antenna. Press MENU, then select General Settings, then Channel Scan.
• If you use a UHF/VHF amplifier to boost the signal level, check to verify that it is operating
correctly.
No audio.
• Make sure that the TV's volume and the converter box’s volume are properly set and not in
“MUTE” mode.
• Make sure that the audio cables are correctly connected.
• Check with the local TV stations. Sometimes they are testing new services on their TV or radio
channels.
• Make sure that the AV setting on the converter box is set to STEREO, instead of ALTERNATE
AUDIO. Some stations don’t broadcast on the Alternate Audio channel. When in Alternate
Audio mode, press OK to switch between the available languages, for example, English or
Spanish audio selection.
No video.
• If using a coaxial cable between the TV and the converter box, make sure the TV is set to
channel 3.
• If using the AV cable, make sure the TV’s input is selected to the correct Video input (AV, Video 1,
etc.).
• Make sure that the video cable between the TV and the converter box is correctly connected.
• Scan for available channels. Press MENU, then select General Settings, then Channel Scan.
• Check with the local TV stations. Sometimes they are testing new video services on their
channels.
NS-DXA2_13-0501_V1_ENG.fm Page 22 Monday, July 29, 2013 8:06 AM