ITT 29-100-1 ST CRT Television User Manual


 
10
Tuning with channel numbers
Enter the SETUP menu by pressing
the blue button.
To exit the SETUP menu press the
TV/TX button.
Use the Program down button to
select PROGRAM NUMBER.
Use the Volume up/down or
numeric buttons to select the desired
programme number.
Use the Program down button to
select STORE. Press the
OKbutton
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again CHANNEL and continue
the tuning procedure until you
have tuned in all the programmes
you want or the television can
receive.
In the SETUP menu use the
Program up/down buttons to
select FINE TUNING. Use the
Volume up and Volume down
buttons to fine tune.
When you have finished use the
Program down button to select
STORE and press the OK button.
Press OK button when CHANNEL
row is blue.
Use OK button to select “S” for
cable channels and “C” for
terrestrial broadcast.
Enter the channel number using the
Numeric buttons or use the
Volume up/down buttons on your
remote control.
Fine tuning
Although the search and Autoprogram
will automatically try and tune to the
best reception, in areas of poor reception
a bit of fine tuning may be required.
SETUP
+ 10