Filter
Top Products
23
Connecting a DVD
player
Via SCART
Make sure the TV and DVD player are both
switched off.
Plug one end of the SCART lead (not
supplied) into the back of the DVD player
and the other end into one of the SCART
sockets on the back of the TV.
Switch on the DVD and the TV.
Press theAV button on the remote
control to select AV1, AV2 or AV3
correspond with SCART socket
you are using on the back of the TV.
Via RCA lead (optional)
Make sure the TV and DVD player are both
switched off.
Plug one end of the RCA lead into the video
and audio out sockets on the back of the
DVD player and plug the other end into the
video and audio in sockets of the TV.
Press the AV button repetitively and
select the AV3 (AV4 optional) mode.
Press the AV button repetitively
to select AV3-S or AV4-S (optional).
Plug the S-Video plug into the S-Video
socket and the audio leads into the audio
sockets.
You can also connect it through the
S-Video socket of the TV.
Via RCA lead and S-Video socket
R
L
VIDEO
R
L
AUDIO OUT
AV
AV
AV
AV3/AV4
AV3/AV4
Note: Scart 1 and Scart 3 (optional)
will give you RGB picture quality.
For DVD connections RGB capable scart
sockets (AV1 or AV3) are recommended.
R
L
VIDEO
S-Video In
AV1
AV2
AV3