Jasco RM24993 Universal Remote User Manual


 
14
Remote does not operate your product.
Press the mode button of the product you want
to control.
Program the remote with a new code.
Install new batteries. (You might have to
reprogram your remote after installing new
batteries.)
Remote may not be compatible with your
product.
Remote does not operate some
features of your product.
Sometimes a particular code might operate
some features but not all. Try programing
remote with a new code.
Remote may not be able to operate all features
of your product or button names might be
different than your product.
Red Indicator blinks after you program
a product code.
Remote did not accept the code.
Try to program the code again or try a different
code.
Lost Your Codes?
Enclosed with this remote is a sticker on which
you should write the codes for each device you
programmed. Apply the sticker to the back of
the remote or somewhere convenient for future
reference.
Also on the sticker is our website address which,
should you lose your codes or programming
instructions, you can nd available on our website:
www.jascoproducts.com
Troubleshooting