JVC 0405TKH-CR-MU CRT Television User Manual


 
6
AV-32/28EX5BK / LCT1821-001A-U / ENGLISH
Setting up your TV
Connecting the aerial
The connecting cables are not provided.
For further details, refer to the manuals provided with the devices to be connected.
Caution
Turn off all the equipment including the TV before connecting anything.
If you connect via a device with an
antenna terminal such as a VCR,
follow A B C in the diagram
opposite.
If you connect the antenna
directly to the TV, follow 1.
To connect more equipment, please see
“Connecting the external devices” on
page 53.
To connect additional audio equipment,
see “Connecting Speakers/Amplifier” on
page 55.
When receiving Digital terrestrial
broadcasting (DVB-T), reception can
suddenly be lost if the signal becomes
weak. Use a correctly installed high-
performance antenna.
When connecting via a device with an
antenna terminal such as a VCR, depending
on the connection method, the signal may
be weakened. If this happens, use a booster
to increase the signal strength.
In areas with a lot of radio communication
such as near ports or airports, noise may
be introduced into the picture or sound. In
such cases, reception may be improved by
using a high-performance antenna.
Read the instruction manual of the
devices which you connect to the TV.
R
AUDIO OUT
L
SERVICE
EXT-1
EXT-2
SERVICE
21-pin
SCART
Cable
Back of the TV
75-ohm
Coaxial
Cable
AV IN/OUT
Terminal
To Aerial
Output
To Aerial
Input
VCR
Aerial
75-ohm
Coaxial
Cable
CAM (CI) slot
Not available
(For service
adjustments)
Body_Eng.fm Page 6 Thursday, April 14, 2005 4:14 PM