- 9 -
Selecting Standard
STANDARD can be selected BG, I, L or DK by pressing
or
button.
Selecting Colour System
Using or button on Colour System, you can change
the colour system to PAL, SECAM or AUTO.
Note: In EXT mode, you can choose NTSC 3.58 and NTSC
4.43 as well.
Selecting Decoder (EXT2)
You can use this mode to connect any decoder to your TV.
Press the
or buttons to turn it on or off.
When you turn Decoder on, EXT-2 output will be chosen as TV
mode only and any scrambled channels will be unscrambled
through decoder connected your TV via EXT-2 output.
Decoder setting should be stored separately for each
programme.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjustment (after
coarse adjustment), if you are not happy with the image on
the screen.
Use
or button on FINE TUNING item, until getting
the best image on the screen.
In Channel option, normally the Fine Tuning cursor is placed
at the middle on the slider, and this is indicated with two recip-
rocal arrows.
Selecting Search
Using or button select Search item.
Press
or button in order to start channel search.
SEARCHING... is displayed during the search process.
Searching is stopped as soon as a station is found or
,
, , buttons are pressed.
To Store Settings
Using or button select Store.
Press
or button to store Installation menu settings.
Programme Menu
Press MENU button, now you are in MENU. In the MENU,
select PROGRAMME using or button. Then enter
the Program menu by pressing
or button.
Moving cursor to four directions you can reach 30 programmes
in the same page. You can scroll the pages up or down by
pressing the navigation buttons.
By cursor action, programme selection is done automatically.
Selected programme is displayed with HIGHLIGHTED char-
acters.
Programme Number is between 00 and 99. Programme Name
has a name string with 5 characters. After autostore process
the Programme Names are set to:
Channel search C01 or S01 (band and channel number),
as default.
At the bottom of the menu there is a programme sort functions
section. Each function is activated by a colour button. NAME,
changes the programme name. DELETE, deletes undesired
programmes. INSERT, inserts a programme into another
programmes position. By selecting AUTOSTORE, Autostore
menu will be available.
NAME:
You can change the name of a selected programme by press-
ing the RED button (NAME). First letter of the selected
programme is displayed with a highlighted character. To
change that letter
or button can be used, and to
select the other letters,
or button can be used.
After changing the name, press the RED button to store the
new name or press the BLUE button to cancel.
INSERT:
When the GREEN button (INSERT) is pressed, NAME,
AUTOSTORE and DELETE functions are erased and the
selected programme is displayed with green characters. Use
the navigation buttons to select another programmes posi-
tion. When the GREEN button is pressed again, the first se-
lected programme will be inserted into the position of the cur-
rent selection.
Press the BLUE button to cancel the activated INSERT pro-
cess.
DELETE:
Press the YELLOW button to select a programme that you
want to delete. When the YELLOW button is pressed again
the selected programme will be deleted.
Pressing the BLUE button cancels the activated DELETE
process.
AUTOSTORE:
(A.P.S. (Automatic Programming System))
A.P.S. searches and sorts all channels and stores them auto-
matically on your TV, according to the transmission of pro-
gramme systems in your area.
To enter Autostore menu, press the BLUE button.
A01-ENG&BG-AK49-C1100UK-2834-CLED-PLLCH-(AV-28RT4SU)-10041581-5008XXXX.p65 23.05.2006, 11:029