Filter
Top Products
- 12 -
Peripheral Equipment Connections
There is a wide range of audio and video equipment that can
be connected to your TV.
Connection diagrams at the end of this section show you where
the different equipment should be connected at the back side of
the TV.
Via the Euroconnector
Your TV set has 2 Euroconnector sockets. If you want to
connect peripherals (e.g. video, decoder, etc.) which have
Euroconnectors, to your TV, use EXT.1 or EXT.2 input.
If an external device is connected via Euroconnector sockets,
TV is switched to AV mode automatically. In this case if both
sockets are connected, SCART1 has the precedence.
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the EXT.2
terminal. If not, the T-V LINK function will not work properly.
When connecting a T-V LINK compatible VCR to the EXT.2
terminal, be sure to connect the decoder to the VCR. If not,
the T-V LINK function may not work properly. And then set
the Decoder(EXT2) (see page 9) function for the channel to
ON to unscramble a scrambled channel.
RGB mode
If an equipment can output the RGB signals, connect it to the
EXT.1 terminal.
EXT2S Mode
If the equipment connected to your TV set supports S-Video
(Y/C) output from Euroconnector, you can have a better pic-
ture quality by selecting EXT2S mode and connecting your
equipment to the EXT.2 (EXT2S) terminal of TV. See your
equipments booklet to check if your equipment has such fea-
ture.
Via the RCA jacks
If you have an equipment (such as a Camcorder) which has
the RCA jacks, connect it to the EXT-3 terminal with the video
and audio cables.
Via the ANT (aerial) socket
If your equipment does not have an Euroconnector or RCA
jacks, connect it to the TV with an aerial cable. For details,
see the manual provided with the equipment.
To store the test signal that comes from the equipment, see
Installation Menu on page 8 and store it to the program
number 0. You can watch images from that equipment to
select the program number which you stored the test signal.
Decoder
Cable TV offers you a wide choice of programmes. Some of
them are free, others are to be paid for by the viewer. This
means that you will need to subscribe to the broadcasting
organisation whose programmes you wish to receive. This
organisation will supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information ask your dealer. See also the booklet
supplied with your decoder.
Connect a decoder with an aerial socket to the TV
Connect the aerial cable.
Connect a decoder without an aerial socket to the
TV
Connect the decoder to your TV with a eurocable (RCA Jack
Cable) to EXTERNAL (RCA Jack). When your decoder has a
Euroconnector / RCA Jack you can obtain better picture
quality if you connect a eurocable (RCA Jack Cable) to
EXTERNAL (RCA Jack).
TV and Video Recorder (VCR)
Connect the Video Recorder to the ANT (antenna input) socket
of the TV with the aerial cable.
Connect the Video Recorder to the EXT.1 or EXT.2 terminal
with the SCART cable.
NTSC Playback
Connect a NTSC video recorder to a terminal. Then press AV
button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in AV mode.
Camera and Camcorder
To connect to the EXT-3 terminal
Connect your camera or camcorder to the right side of your
TV.
Connect your equipment to the TV via VIDEO (yellow), AU-
DIO R (red) and AUDIO L (white) inputs. You should connect
the jacks to the input in the same colour.
Connect the decoder to the video recorder
Some video recorders have a special euroconnector for de-
coder.
Connect a eurocable to the euroconnector of your decoder
and to the special euroconnector of your video recorder. See
also the handbook of your video recorder.
To connect your video recorder to the TV, see TV and Video
Recorder section.
If you want to connect more equipment to your TV, consult
your dealer.
Connecting Headphones
Use the stereo headphone socket on the right side of your TV,
to connect headphones.
A01-ENG&BG-AK49-C1100UK-2834-CLED-PLLCH-(AV-28RT4SU)-10041581-5008XXXX.p65 23.05.2006, 11:0212