Filter
Top Products
32 Button Functions - VCR
Skip Search
Each time you press the SKIP SEARCH button while
a tape is playing, the unit will fast-forward ahead
30 seconds on the tape. You may press the button
up to four times in a row to move 120 seconds
(two minutes) ahead.
SKIP SEARCH
EZ Ject
Pressing EZ Ject automatically rewinds and ejects
the video cassette in the unit.
EZ JECT
Re-View
Once a timer recording has finished, press the
RE-VIEW button to automatically rewind the tape to
the start of the newly recorded program.
RE-VIEW
SP/EP
Selects a recording speed (SP or EP) for simple
recording. See “Regular VCR Programming” on
page 25 for more information.
SP/EP
Cancel
Press CANCEL to delete a pre-set timed program
from memory or if you incorrectly input a VCR
Plus+ code on the VCR Plus+ screen.
CANCEL
Display
You can check how much time remains on a video
cassette or tape speed setting by pressing DISPLAY
while a video cassette is playing. See page 29 for
more information on display.
DISPLAY
Daily/Weekly
Selects how often a program will be recorded:
Once, Daily (at the same time everyday), or
Weekly (at the same time once each week).
Pressing DAILY/WEEKLY will access this option in
the Timer Recording menu.
DAILY/WEEKLY
VCR Plus+
A one-touch way to access the TV/VCR combo’s
VCR Plus+ functions. For more information on
timer recording with VCR Plus+, see page 27.
VCR PLUS+
Timer
Lets you turn the Timer Mode ON or OFF.
TIMER
Shuttle Plus +/-
Lets you gradually increase or decrease the
playback speed of a video cassette. With a
videotape playing, choose either the SHUTTLE PLUS
+ or SHUTTLE PLUS - button.
SHUTTLE PLUS +
Each time this button is pressed, playback speed
will increase. The forward speed may be
increased by up to four steps.
SHUTTLE PLUS -
Each time this button is pressed, playback speed
will decrease. After six presses the tape will begin
to play in reverse slow motion. Continue to press
SHUTTLE PLUS - to make the tape play
backwards at an accelerated rate. SHUTTLE PLUS -
may be pressed up to 14 times.
To resume playback at normal speed, press the
PLAY button.
NEXT Function
You can automatically perf o rm some VCR f u n c t i o n s
using two-button combinations. You can automatically
s t a rt playback, go into Timer Stand-by, or turn the
power off after rewinding a tape by using the button
combinations shown below.
To automatically start playback after rewind:
REW, then PLAY within 2 seconds
To automatically start Timer Stand-by after rewind:
REW, then TIMER within 2 seconds
To automatically shut power off after rewind:
REW, then POWER within 2 seconds