Filter
Top Products
13
This function can display the time up sign on the screen as illustrated
to let you know that the time has come when the set alarm time is
reached. This only happens when the TV is on. This may remind you
to do something.
1
Press the MENU button to display the
main menu. Use the
▲ or ▼ button to
highlight the
TIMER menu.
2
Press the P.MODE/OK button.
3
Use the ▲ or ▼ button to highlight the ALARM TIMER menu.
4
Highlight the time setting column by using the
ᮤ
or
ᮣ
button,
and using the
▲ or ▼ button to select a time period. The
display changes in 5 minute steps and the maximum time
period is 3:00 hours.
✐
To change to another timer mode, first select timer selection mode
(highlight a row) using the
ᮤ
or
ᮣ
button and then change desired
timer mode by using the
▲ or ▼ button
.
When the time period is up, the time up signal will appear on
the screen and the alarm will sound for 15 seconds.
✐ To make this alarm display disappear, press any button.
To cancel the Alarm timer, select timer “-:--” by pressing the
P.MODE/OK
button or using the ▲ or ▼ button in step 4.
Up to 100 broadcast stations in your reception area can be stored in
the electronic memory.
There are two modes of pre-setting channels as follows:
■ ATS EURO PLUS (Auto-tuning system)
All receivable channels are automatically found, stored and sorted.
■ PRG. PRESET (Manual tuning)
Used to preset a receivable channel in any desired programme position.
1
Press the MENU button to display the
main menu. Use the
P▲ or P▼ button to
highlight the
PRESET menu.
2
Press the P.MODE/OK button.
3
Use the ▲ or ▼ button to highlight the ATS EURO PLUS
menu, then press the P.MODE/OK button.
4
Use the ▲ ,▼ , ᮤ or
ᮣ
button to select the location where you
are. Select the country identification letter, and then press the
P.MODE/OK button.
5
Use the ▲ ,▼ , ᮤ or
ᮣ
button to select the display language.
Select the language identification letter, and then press the
P.MODE/OK button.
■ The ATS euro plus system will be started as follows;
The tuning status will appear on the screen.
After completing the searching operation for all available stations, the
Auto sorting will be done according ATS euro plus sorting rule based
on your country selection. Then the programme position 1 is selected.
Now the ATS euro plus operation is completed !
The ATS operation can be cancelled at any time by pressing the
MENU button.
TIMER / PRESETTING
TIMER / PRESETTING
Alarm Timer Setting
Presetting
PICTURE
SOUND
SETTING
PRESET
LANGUAGE
TIMER
MENU
OK EXIT : MENU
OFF TIMER --
ON-TIMER -- : -- --
ALARM TIMER 2 : 15
TIMER
ADJUST :
SELECT :
OFF : OK
EXIT : MENU
>> <<
pi pi pi
pi pi pi
What is ATS euro plus ?
TV stations broadcast their programs on their own channels.
These channels must be assigned to programme positions in the
TV. ATS euro plus is automatic channel programming. This
channel search and memory system scans the entire reception
range, stores the programs found and enters them, with the
accompanying station identification in the memory. The programs
thus found are, at the same time, evaluated on terms of their
reception quality. This means that programs with insufficient
reception quality are entered further down in the programme
position. As a result, only programs with good picture quality are
entered in the front programme positions.You can, of course,
alter this automatic allocation of programme positions as you
wish.
ATS EURO PLUS (Auto-tuning system)
PICTURE
SOUND
SETTING
PRESET
LANGUAGE
TIMER
MENU
OK EXIT : MENU
ATS EURO PLUS
PRG. PRESET
CH SWAP
PRESET
OK EXIT : MENU
ABCHDDKEFGB
I N NL P S SF OTHERS
COUNTRY
SELECT :
OK EXIT : MENU
DDKE FGB
INLPSSF
LANGUAGE
SELECT :
OK EXIT : MENU
POS. 2
CH C 5
ATS EURO PLUS
EXIT : MENU
ENGLISH