JVC AV28R250EK CRT Television User Manual


 
Remote control buttons and functions
15
$95(./&7$8(1*/,6+
Displaying the current time
You can display the current time on the
screen.
Press the
h
(Information) button to
display the current time
Pressing the
h
(Information) button changes
the display as follows:
This TV uses teletext data to set the time.
If the TV has not received a TV channel
that has teletext programmes since it was
turned on, the time display is blank. To
see the time, choose a TV channel that has
teletext programmes. The time will still
be displayed as long as you do not turn off
the TV, even if you choose other TV
channels.
When watching videos, an incorrect time
is sometimes displayed.
Return to TV channel instantly
You can return to a TV channel instantly.
Press the b button
The TV returns to the TV mode and a TV
channel appears.
Operating a JVC brand VCR or
DVD player
These buttons will operate a JVC brand VCR
or DVD player. Pressing a button that looks
the same as the device’s original remote
control button has the same effect as the
original remote control.
1 Set the VCR P DVD switch to the
VCR or DVD position.
VCR:
When you are using a VCR, set the switch
to the VCR position.
DVD:
When you are using a DVD player, set the
switch to the DVD position.
P (Text):
When you are viewing Teletext
programmes, set the switch to the
P (Text) position.
2 Press the VCR/DVD control button
to control your VCR or DVD player
If your device is not made by JVC,
these buttons will not work.
Even if your device is made by JVC,
some of these buttons may not work,
depending on the device you are using.
You can use the p buttons to choose
a TV channel the VCR will receive, or
choose the chapter the DVD player
plays back.
Some models of DVD player use the
p buttons for both operating the fast
forward/backward functions and for
choosing the chapter. In this case, the
253 buttons do not work.
No indication
Current time
AV-32&28R25EK.fm Page 15 Wednesday, February 13, 2002 6:26 PM