Filter
Top Products
ENGLISH - 10 -
Feature Menu
Press MENU button, now you are in main menu. In the
main menu, select FEATURE, using
or button.
Then enter the feature menu pressing
or button.
Sleep Timer:
The sleep timer is used to turn the TV off after a defined peri-
od. Press
or button to choose a period of time after
selecting this item. The timer can be programmed between
Off and 120 minutes in steps of 10 minutes. (OFF, 010, 020,
030, 040, ......... ,120.)
If sleep timer is activated, at the end of the selected the time,
the TV goes automatically to stand-by mode.
Child lock:
You can disable the control panel buttons (except the POW-
ER button) with this item.
Press
or button to change the setting to On or Off after
selecting this item.
When you set this item to On, the TV can be operated only
by using the remote control handset.
Warning: If Child Lock item is set to ON, the TV can not be
operated by VCR.
Language:
Menu Language can be selected by pressing or button
on Language item.
Setting External Source Output:
You can use this menu to select the internal or external
source that will be output at EXT.2 terminal.
In the FEATURE menu select EXT-2 OUTPUT using
or button. Then select the source you want to
be output at EXT.2 pressing
or button (one of the
sources: TV, EXT-1, EXT-3 or EXT-4 (Front AV).
Blue Background During No-Signal:
The BLUE BACKGROUND feature can be set by or
button to either ON or OFF.
Install (Installation) Menu
You can store a channel manually, or modify the current set-
tings of a channel (for example, fine-tuning a channel).
You can also changing the colour system, or change the
DECODER(EXT-2) setting.
Press MENU button to display the main menu.
Press
or button to select INSTALL item.
Then
or button to display the INSTALL menu.
Note:
If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on screen.
In AV mode, you can change only the COLOUR SYSTEM
item.
1. PROGRAMME will be the first selected item as you enter
the INSTALL menu. Pressing
or button select the
programme number where you want to the tuned channel
to be stored. (You may also type the programme number
using the digit buttons.)
Note:
Do not use PROGRAMME item when you modify the cur-
rent programme numbers setting. If you select other
programme number by mistake, the selected programme
numbers setting will be changed.
2. Press
or button to select BAND. Using or
button to select the band in which you want to search
a channel.
3. Press
or button to select SEARCH. Press
or button to start searching. (Press button to
search forward. Press
to search backwards.)
If the found channel is not the desired one, press
or
button to start searching again.
To stop searching before a channel is found, press the
reverse direction button. For example, when the TV is
searching forward with
button, press button to
stop searching.
ENG-2835-AK45-1512UK-16-9-BSI-(AV-28GT1&BJF&SJF).p65 30.05.2003, 15:2510