Filter
Top Products
ENGLISH - 8 -
Setting Balance:
Using or button select Balance.
Press
button to change balance rightward.
Press
button to change balance leftward.
Hyper Sound:
You can use this feature to switch on or off Hyper Sound.
Pressing
or button will turn on or off this feature. If the
current sound system is MONO and the Hyper Sound is set
ON, then the sound will be heard as if it is STEREO. If the
current sound system is STEREO, switching Hyper Sound
on will make the sound deeper. Switching it off will make no
change in MONO and STEREO.
Hyper Sound can be set On or Off also by GREEN button.
Picture Menu
To change picture settings:
Press MENU button, now you are in main menu. In the
main menu, select PICTURE using
or button,
then enter the picture menu pressing
or button.
Note: When Picture Mode is not MANUAL, BRIGHTNESS,
CONTRAST and COLOUR options can not be reached by
or buttons.
Factory Settings:
In the Picture Menu if you press the YELLOW button the ad-
justments switches themselves to the factory settings.
Setting Brightness:
You can change Brightness only when Picture Mode is se-
lected MANUAL.
Using
or button select Brightness.
Press
button to increase Brightness.
Press
button to decrease Brightness.
Setting Contrast:
You can change Contrast only when Picture Mode is select-
ed MANUAL.
Using
or button select Contrast.
Press
button to increase Contrast level.
Press
button to decrease Contrast level.
Setting Colour:
You can change Colour only when Picture Mode is selected
MANUAL.
Using
or button select Colour.
Press
button to increase Colour level.
Press
button to decrease Colour level.
Setting Sharpness:
Using or button select Sharpness.
Press
button to increase Sharpness level.
Press
button to decrease Sharpness level.
Setting Hue (In AV mode only) :
Using or button select Hue.
Press
button to increase Hue level.
Press
button to decrease Hue level.
Hue adjust is functional only when NTSC 3.58/4.43 is applied
in AV mode. It does not appear when other colour systems
used.
Setting VCR Mode (In AV mode only) :
Using or button select VCR MODE.
When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "VCR MODE"
setting from "ON" to "OFF".
ENG-2835-AK45-1512UK-16-9-BSI-(AV-28GT1&BJF&SJF).p65 30.05.2003, 15:258