Filter
Top Products
ip
Set Leck Code
Channel Guard and V_Chip settings are protected by a four-digit Lock Code. Your TV comes
pre_set with a Lock Code of "0000". You may change the code to any four-digit number you
wish. To change the Lock Code, follow the steps below.
Access the onscreen menus by pressing ME_u on your remote control. You may then either
use the up and down arrows A T to scroll to the iNiTiAL SETUP menu, or press MENU until the
iNiTIAL SETUP screen appears. Use the A • arrows to move to the Set Lock Code. Press the
4 or l_ arrows to select.
The Padlock icon _ will appear. Press Zero on the remote's lO_key pad to access the LOCK
CODE.
Use the 4 or _ arrow to change the first digit.
When you have selected the first number, move
to the second digit by pressing the _' arrow. You
can change this digit using the 4 _- arrows.
Repeat this process until all four digits are set.
When you have entered your LOCK CODE, press
_' to move to FiNiSH.
Press 4 or _- to exit.
Notes: in order for _TCMp setting s to take eife t, V-Chip settingsmust'--be turned ON in 1
the V-CHIP menu (page 35), You can automatically UnMOCk a!l ef your restdct!ons by tur!ing
I V-CMp settings OFF in the V_CH!R menu (page 35). You can always unblock a restr!CtiOnbY
_re-entering the V-CHIP menu and removing the lock icon.