Filter
Top Products
Getting started
16
Getting
started
XV-515GD [UX, 3U, 4U, US, A, UT, UB] EN
LVT0336-014A
To use the remote control unit for TV operation
You can operate your TV from the remote control unit.
Setting the remote control signal for operating your TV.
1 Holding down TV/VIDEO, enter the manufacturer code of your TV listed below by using the numeric buttons (0 - 9).
Do not release TV/VIDEO. Keep holding it until the next step is completed.
Turns the TV on or off.
Changes the TV channels.
Adjusts the TV volume.
Selects the TV channels
(while holding down the SHIFT button).
*For some TVs, pressing "+10" while holding down SHIFT
functions as the "RETURN," and pressing "10" while holding
down SHIFT functions as the "– / – –" button.
Switches input mode (either TV or VIDEO).
Manufacturer code list
• The remote control unit is initially set for operating a JVC TV.
• If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
TV
/
TV ch
+
–
TV VOL.
+
–
90
to
TV/VIDEO
NOTE
Example:
To enter the manufacturer code "01":
Press "0" then "1."
No. Manufacturer
01 JVC
02 PANASONIC
03 SONY
04 SHARP
05 TOSHIBA/BEIJING/CHANGHONG
06 MITSUBISHI/CHANGHONG
07 HITACHI
08 SANYO
09 FUNAI
10 AIWA
11 DAEWOO
12 SAMSUNG
13 LG (GOLDSTAR)
14 THOMSON
15 FERGUSON
16 PHILIPS/TCL/CHANGHONG
17 GRUNDIG
2 Press STOP while holding down TV/VIDEO.
The following buttons can be used for operating the TV:
3 Try to operate your TV by pressing TV .
If your TV turns on or off, you have successfully set the control signal.
No. Manufacturer
18 JTT
19 MIVER
20 FINLUX
21 NOKIA
22 NEC
23 JINXING/PEONY
24 PEONY
25 PEONY/CHANGHONG
26 KONKA
27 PEIJIN/NOBLEX
28 TCL